 |
HY-cds steel tube
DOOHARVEST
841290
| Quantity: | |
|---|---|
ST52 Pre Honed Tube And CDS Tube Suppliers for Hydraulic Cylinder
1) Production description:
The cold drawn seamless pipe is made of a complete round steel perforated, and the outer layer is a steel pipe without any welding marks.
According to its production method, it can also be divided into hot rolling, cold rolling, cold drawing, extrusion, etc., and the
chemical, automobile, and aviation. to it.
The pre honed tube can be produced according to most popular international standards such as DIN 2391, EN 10216-2, ASTM A513-5, A 519, GB/T 3639 etc. on customer's request.
2) Production Details
Chemical composition(%)
Grade | C | Si | Mn | P | S | Cr | Mo | |
St 45 (DIN1.0408) | 0.21max | 0.35max | 0.40min | 0.025max | 0.025max | / | / | |
St 52 (DIN1.0580) | 0.22max | 0.55max | 1.60max | 0.025max | 0.025max | / | / | |
E355 | 0.22max | 0.55max | 1.60max | 0.025max | 0.025max | / | / | |
1020 | 0.21max | / | 0.30-0.60 | 0.040max | 0.050max | / | / | |
1026 | 0.21max | / | 0.60-0.90 | 0.040max | 0.050max | / | / | |
Mechanical Properties( T=20°C if not differently stated )
Grades | Delivery Conditions | Tensile Strength Rm (Mpa) | Elongation in the longitudinal direction Al (%) |
ST45 | +A (GBK) | 390 min | 21 min |
ST52 | +A (GBK) | 490 min | 22 min |
E355 | +A (GBK) | 450 min | 22 min |
1020 | +A (GBK) | 390 min | 21 in |
Honed tube is produced using our “Suitable to Hone” Drawn Over Mandrel (DOM) and Cold Drawn Seamless (CDS).
The honing process involves using abrasive polishing stones and abrasive paper to remove small amounts of material, cold drawn steel tube to produce extremely precise ID dimensions and improved finishes.
3) Production process and details
The most common treatment methods for seamless tube are cold drawing and heat treatment .
The most popular steel grades of honed tubes is SAE 1020, we also supplier honed tubes in SAE 1026, St 52 and other steel grades such as St35, ST 52.4, St 37.4, E255, E215, etc. on customers' request.
Cold drawn tube is produced using our “Suitable to Hone" Drawn Over Mandrel (DOM) and Cold Drawn Seamless (CDS).
As a professional cds tube suppliers and chrome rod, founded in 2004, operation under modern management system and technologies, ISO9001 certificated, It covers an area of 40, 000 sq. Meters.
Article Name | Cylinder ID mm | Length m | Straightness mm/m | Tolerance on ID | Tolerance on WT | Roughness |
Cold Drawn tube | 40-320 | ≤12m | 0.2-0.5 | / | ±5% | 0.8-1.6 |
Cold rolling tube | 30-100 | ≥12m |
| / | ±5% | 0.8-1.2 |
Cold drawn-honed tubes | 40-500 | 8m | 0.2-0.3 | H8-H9 | ±5% | 0.2-0.8 |
Cold drawn-roll tube | 40-400 | 7m | 0.2-0.3 | H8-H9 | ±5% | ≤0.4m |
Deep-hole tube | 320-400 | 8m | 0.2-0.3 | H7-H9 | ±8% | ≤0.8 |
4、Why Choice Us
China Hydraulic Cylinder CDS Tube Suppliers
1.Professional, rich experience, reliable.
2.One-stop collection for cold drawn steel tube,honed tube, chrome rod, casting cylinder components.
3.Full range of size and material, ready stock goods with fast delivery
4.Customizable, non-standard sizes available
5.Small quantity acceptable
6.Refund or replace if any quality issue.
6) Contact us :Welcome to enquiry us, hope to make long term cooperation with you
Ms. Carter
T:+8613913534277 / 15762491265
Whats app: +86 15762491265
Email: carter@dhonedtube.com
ST52 Pre Honed Tube And CDS Tube Suppliers for Hydraulic Cylinder
1) Production description:
The cold drawn seamless pipe is made of a complete round steel perforated, and the outer layer is a steel pipe without any welding marks.
According to its production method, it can also be divided into hot rolling, cold rolling, cold drawing, extrusion, etc., and the
chemical, automobile, and aviation. to it.
The pre honed tube can be produced according to most popular international standards such as DIN 2391, EN 10216-2, ASTM A513-5, A 519, GB/T 3639 etc. on customer's request.
2) Production Details
Chemical composition(%)
Grade | C | Si | Mn | P | S | Cr | Mo | |
St 45 (DIN1.0408) | 0.21max | 0.35max | 0.40min | 0.025max | 0.025max | / | / | |
St 52 (DIN1.0580) | 0.22max | 0.55max | 1.60max | 0.025max | 0.025max | / | / | |
E355 | 0.22max | 0.55max | 1.60max | 0.025max | 0.025max | / | / | |
1020 | 0.21max | / | 0.30-0.60 | 0.040max | 0.050max | / | / | |
1026 | 0.21max | / | 0.60-0.90 | 0.040max | 0.050max | / | / | |
Mechanical Properties( T=20°C if not differently stated )
Grades | Delivery Conditions | Tensile Strength Rm (Mpa) | Elongation in the longitudinal direction Al (%) |
ST45 | +A (GBK) | 390 min | 21 min |
ST52 | +A (GBK) | 490 min | 22 min |
E355 | +A (GBK) | 450 min | 22 min |
1020 | +A (GBK) | 390 min | 21 in |
Honed tube is produced using our “Suitable to Hone” Drawn Over Mandrel (DOM) and Cold Drawn Seamless (CDS).
The honing process involves using abrasive polishing stones and abrasive paper to remove small amounts of material, cold drawn steel tube to produce extremely precise ID dimensions and improved finishes.
3) Production process and details
The most common treatment methods for seamless tube are cold drawing and heat treatment .
The most popular steel grades of honed tubes is SAE 1020, we also supplier honed tubes in SAE 1026, St 52 and other steel grades such as St35, ST 52.4, St 37.4, E255, E215, etc. on customers' request.
Cold drawn tube is produced using our “Suitable to Hone" Drawn Over Mandrel (DOM) and Cold Drawn Seamless (CDS).
As a professional cds tube suppliers and chrome rod, founded in 2004, operation under modern management system and technologies, ISO9001 certificated, It covers an area of 40, 000 sq. Meters.
Article Name | Cylinder ID mm | Length m | Straightness mm/m | Tolerance on ID | Tolerance on WT | Roughness |
Cold Drawn tube | 40-320 | ≤12m | 0.2-0.5 | / | ±5% | 0.8-1.6 |
Cold rolling tube | 30-100 | ≥12m |
| / | ±5% | 0.8-1.2 |
Cold drawn-honed tubes | 40-500 | 8m | 0.2-0.3 | H8-H9 | ±5% | 0.2-0.8 |
Cold drawn-roll tube | 40-400 | 7m | 0.2-0.3 | H8-H9 | ±5% | ≤0.4m |
Deep-hole tube | 320-400 | 8m | 0.2-0.3 | H7-H9 | ±8% | ≤0.8 |
4、Why Choice Us
China Hydraulic Cylinder CDS Tube Suppliers
1.Professional, rich experience, reliable.
2.One-stop collection for cold drawn steel tube,honed tube, chrome rod, casting cylinder components.
3.Full range of size and material, ready stock goods with fast delivery
4.Customizable, non-standard sizes available
5.Small quantity acceptable
6.Refund or replace if any quality issue.
6) Contact us :Welcome to enquiry us, hope to make long term cooperation with you
Ms. Carter
T:+8613913534277 / 15762491265
Whats app: +86 15762491265
Email: carter@dhonedtube.com
