 |
HY-CDS
DOOHARVEST
730431
| Quantity: | |
|---|---|
High Quality Cold Drawn Seamless Tube 1026 Cds Tubing
Cold Drawn Seamless Mechanical Tubing (CDS) is a cold drawn 1018/1026 steel tube which offers uniform tolerances, enhanced machinability and increased strength and tolerances compared to hot-rolled products. Produced from hot rolled 1026, the cold drawing process increases the tube's physical properties and offers better tolerances and reduced machining allowances over hot finish seamless.
1) Production description:
CDS tube sizes can be same as honed tube, then we can control the tolerance as your requirement.
Cold drawn steel tube processing:
Raw Materia l→ Acid cleaning → Parkerizing →Cold-drawn →stress relieving→ leveling→ saw off not good parts→ inspection→ packing
2) Production Details
Grade | C | Si | Mn | P | S | Cr | Mo | |
St 45 (DIN1.0408) | 0.21max | 0.35max | 0.40min | 0.025max | 0.025max | / | / | |
St 52 (DIN1.0580) | 0.22max | 0.55max | 1.60max | 0.025max | 0.025max | / | / | |
E355 | 0.22max | 0.55max | 1.60max | 0.025max | 0.025max | / | / | |
1020 | 0.21max | / | 0.30-0.60 | 0.040max | 0.050max | / | / | |
1026 | 0.21max | / | 0.60-0.90 | 0.040max | 0.050max | / | / | |
Mechanical Properties( T=20°C if not differently stated )
Grades | Delivery Conditions | Tensile Strength Rm (Mpa) | Elongation in the longitudinal direction Al (%) |
ST45 | +A (GBK) | 390 min | 21 min |
ST52 | +A (GBK) | 490 min | 22 min |
E355 | +A (GBK) | 450 min | 22 min |
1020 | +A (GBK) | 390 min | 21 in |
Article Name | Cylinder ID mm | Length m | Straightness mm/m | Tolerance on ID | Tolerance on WT | Roughness |
Cold Drawn tube | 40-320 | ≤12m | 0.2-0.5 | / | ±5% | 0.8-1.6 |
Cold rolling tube | 30-100 | ≥12m |
| / | ±5% | 0.8-1.2 |
Cold drawn-honed tube | 40-500 | 8m | 0.2-0.3 | H8-H9 | ±5% | 0.2-0.8 |
Cold drawn-roll tube | 40-400 | 7m | 0.2-0.3 | H8-H9 | ±5% | ≤0.4m |
Deep-hole tube | 320-400 | 8m | 0.2-0.3 | H7-H9 | ±8% | ≤0.8 |
3) Packing and Delivery
1.Anti-rust oil coated.
2.Each end sealed by plastic cap.
3.Each bundle twined by woven bag,
4.Seaworthy woodencase packaged.
4) Our company and Advantages .
As the biggest cds tube suppliers, we were established under modern management system and technologies in 2003. It covers an area of 40,000 sq. meters, plant cover 25,000 sq. meters and building area of 30,000 sq. meters. All processing control include cold-drawn, heat treatment, honing, peeling, grinding, polishing. There are 60sets of advanced equipment and 70+ skilled technical workers, annual output over 20,000tons.
Why Choice Us
1.Professional, rich experience, reliable in pre honed tube, cds steel tube, honed tube and chrome rod, hydrulic pipe.
2.One-stop collection for honed tube, chrome rod, casting cylinder components.
3.Full range of size and material, ready stock goods with fast delivery
4.Customizable, non-standard sizes available
5.Small quantity acceptable
6.Refund or replace if any quality issue.
6) Contact us
Carter
Whats app: +8615762491265
Email: carter@dhonedtube.com
High Quality Cold Drawn Seamless Tube 1026 Cds Tubing
Cold Drawn Seamless Mechanical Tubing (CDS) is a cold drawn 1018/1026 steel tube which offers uniform tolerances, enhanced machinability and increased strength and tolerances compared to hot-rolled products. Produced from hot rolled 1026, the cold drawing process increases the tube's physical properties and offers better tolerances and reduced machining allowances over hot finish seamless.
1) Production description:
CDS tube sizes can be same as honed tube, then we can control the tolerance as your requirement.
Cold drawn steel tube processing:
Raw Materia l→ Acid cleaning → Parkerizing →Cold-drawn →stress relieving→ leveling→ saw off not good parts→ inspection→ packing
2) Production Details
Grade | C | Si | Mn | P | S | Cr | Mo | |
St 45 (DIN1.0408) | 0.21max | 0.35max | 0.40min | 0.025max | 0.025max | / | / | |
St 52 (DIN1.0580) | 0.22max | 0.55max | 1.60max | 0.025max | 0.025max | / | / | |
E355 | 0.22max | 0.55max | 1.60max | 0.025max | 0.025max | / | / | |
1020 | 0.21max | / | 0.30-0.60 | 0.040max | 0.050max | / | / | |
1026 | 0.21max | / | 0.60-0.90 | 0.040max | 0.050max | / | / | |
Mechanical Properties( T=20°C if not differently stated )
Grades | Delivery Conditions | Tensile Strength Rm (Mpa) | Elongation in the longitudinal direction Al (%) |
ST45 | +A (GBK) | 390 min | 21 min |
ST52 | +A (GBK) | 490 min | 22 min |
E355 | +A (GBK) | 450 min | 22 min |
1020 | +A (GBK) | 390 min | 21 in |
Article Name | Cylinder ID mm | Length m | Straightness mm/m | Tolerance on ID | Tolerance on WT | Roughness |
Cold Drawn tube | 40-320 | ≤12m | 0.2-0.5 | / | ±5% | 0.8-1.6 |
Cold rolling tube | 30-100 | ≥12m |
| / | ±5% | 0.8-1.2 |
Cold drawn-honed tube | 40-500 | 8m | 0.2-0.3 | H8-H9 | ±5% | 0.2-0.8 |
Cold drawn-roll tube | 40-400 | 7m | 0.2-0.3 | H8-H9 | ±5% | ≤0.4m |
Deep-hole tube | 320-400 | 8m | 0.2-0.3 | H7-H9 | ±8% | ≤0.8 |
3) Packing and Delivery
1.Anti-rust oil coated.
2.Each end sealed by plastic cap.
3.Each bundle twined by woven bag,
4.Seaworthy woodencase packaged.
4) Our company and Advantages .
As the biggest cds tube suppliers, we were established under modern management system and technologies in 2003. It covers an area of 40,000 sq. meters, plant cover 25,000 sq. meters and building area of 30,000 sq. meters. All processing control include cold-drawn, heat treatment, honing, peeling, grinding, polishing. There are 60sets of advanced equipment and 70+ skilled technical workers, annual output over 20,000tons.
Why Choice Us
1.Professional, rich experience, reliable in pre honed tube, cds steel tube, honed tube and chrome rod, hydrulic pipe.
2.One-stop collection for honed tube, chrome rod, casting cylinder components.
3.Full range of size and material, ready stock goods with fast delivery
4.Customizable, non-standard sizes available
5.Small quantity acceptable
6.Refund or replace if any quality issue.
6) Contact us
Carter
Whats app: +8615762491265
Email: carter@dhonedtube.com
