Views: 0 Author: Carter Publish Time: 2018-03-01 Origin: carter@dhonedtube.com
Hard chrome plated rod look very attractive and serve heavy duty purposes. They are designed with the finest and advanced techniques of surface removal, polishing, hard chrome plating etc. They are available as per the requirements of the customer and are used in different areas of construction, material, handling equipment, farm equipment, industrial machinery and almost at maximum places. where the rods first undergo precision milling and processing, and are then put through gard surface chromium treatment, allowing a surface precision level of f8, and a surface hardness reaching HV850 minimum and up, which not only help to improve wear resistance but also help to extend the life cycle of the rods, thus helping the customer save cost.
The chrome plating of the chrome plated bars plays an important role in the performance of the substrate. Firstly, the wear resistance of the product is obviously improved. The chrome plating layer can obtain different hardnesses of 400 to 1200 HV depending on the process specifications. The sliding friction coefficient is about 50% of that of steel and cast iron, and it has anti-adhesion. Secondly, the corrosion resistance is improved. The chrome layer is surface passivated under slight oxidation, forming a very thin and transparent passivation film, which does not change color at room temperature for a long time, and protects the chrome plating layer. http://www.honed-tube.net/
For chrome plated piston rod, the strength of the chrome-plated layer decreases with the increase of its thickness. The bonding strength between the chrome-plated layer and the substrate is higher than the bonding strength between the crystals, and the tensile strength and fatigue strength decrease with the increase of the thickness of the coating. Therefore, the thickness of the chrome plating layer should generally be less than 0.3 mm.
Contact us
Mss. Carter : )
WhatsApp: +86 1576249 1265
Email: carter@dhonedtube.com